FORGOT YOUR DETAILS?

Check out the new BOS Golf Shop

Finishes and Prices

shiny-black-oxide

SHINY BLACK OXIDE FINISH (CARBON STEEL HEADS ONLY) – $70 EACH

Paint fill is included on all our finishes after the plating is complete. (not available for stainless models)

Start your order form

satin-black-oxide1

SATIN BLACK OXIDE FINISH (CARBON STEEL HEADS ONLY) – $75 EACH

The $75 base cost includes restoration of nicks and dents. The satin black oxide option is in between shiny and matte in terms of glare and black oxide on carbon options. Paint fill is included on all our finishes after the plating is complete. (not available for stainless models)

Start your order form

iii-black

III BLACK OXIDE FINISH (CARBON STEEL HEADS ONLY) – $75 EACH

Always a good choice for carbon heads; low glare on the top, satin face, and a shiny finish on the sole. This finish is not applicable to stainless putters.

Start your order form

black-oxide-stainless

SATIN BLACK OXIDE ON STAINLESS – $75 EACH

This finish is in between a high gloss and a matte black finish. Custom Paint fill is included on all our finishes after the plating is complete.

Start your order form

shiny-fools-gold-600

Shiny FOOLS GOLD – $75 EACH

Stainless steel heads only. This is a dark golden finish with a shiny finish. Restoration of nicks and dents is included in the base cost, as well as custom paint fill.

Start your order form

satin-fools-gold-600

SATIN FOOLS GOLD – $75 EACH

Stainless steel heads only. This is a dark golden finish with a satin finish. Restoration of nicks and dents is included in the base cost, as well as custom paint fill.

Start your order form

misted-fools-gold-600

Misted FOOLS GOLD – $75 EACH

Stainless steel heads only. This is a dark golden finish misted for a matte sheen. Restoration of nicks and dents is included in the base cost, as well as custom paint fill.

Start your order form

fools-gold-wide copy

2X FOOLS GOLD – $75 EACH

Stainless Steel Heads Only, satin finish on the top, cavety and face, shiny finish on the bottom – will be a dark golden color

Start your order form

shiny-aquamarine

AQUAMARINE FINISH – $70 EACH

Only available for carbon steel heads.

Start your order form

matte-aquamarine-600

MISTED AQUAMARINE FINISH – $75 EACH

Only available for carbon steel heads.

Start your order form

bettinardi-satin-chocolate-patina

CHOCOLATE PATINA – $75 EACH

Chocolate Patina is only available on carbon steel heads, and available in three sheens.

Start your order form

iii-chocolate-patina-600

III CHOCOLATE FINISH – $85 EACH

III Chocolate finish only available on Carbon Steel heads.

Start your order form

black-polymer-delmar-bottom

BLACK POLYMER FINISH -$90 Each (base price)

Available in Black (This finish has yet to be approved by the USGA & RNA and will not be applied to the face of a head unless it contains a face insert).

Start your order form

white-polymer-600

WHITE POLYMER FINISH -$90 Each (base price)

Available in White (This finish has yet to be approved by the USGA & RNA and will not be applied to the face of a club unless it contains a face insert).

Start your order form

2x-white-polymer-600

2X POLYMER FINISH WITH SECONDARY FINISH -$130 Each (Base Price)

2X White or Black Polymer & Secondary BOS Golf finish (This finish has yet to be approved by the USGA & RNA and will not be applied to the face of a club unless it contains a face insert).

Start your order form

patina-oil-can-600

PATINA OIL FINISHES – $75 EACH

Patina finishes only available on Carbon Steel heads.

Start your order form

iii-patina-oil-600

III PATINA OIL FINISH (MATTE) CARBON STEEL – $85 EACH

Shiny sole, satin on the face and matte oil can finish on the top. (only available on Carbon Steel heads)

Start your order form

sand-blast

2x BEADBLAST FINISH – $70 EACH

AVAILABLE FOR STAINLESS STEEL ONLY. Satin on the face and sole, matte on top and cavity area

Start your order form

Tiffany Color Poly ( FYI: Cannot be applied to face unless there is a face insert)

Tiffany Color Poly

TIFFANY COLOR POLYMER FINISH – $90 Each (Base Price)

This finish has yet to be approved by the USGA & RNA. BOS Golf will not apply this finish to the face of any club unless it contains a "face insert".

Start your order form

Poly Finish (2) (1)

RED POLYMER FINISH – $90 Each (Base Price)

This finish has yet to be approved by the USGA & RNA. (please note this finish will not be applied to the face of any club unless it contains a "Face Insert")

Start your order form

Red Poly with Matte Black Poly on Sole plate and black poly on weights (1)

2x Red Poly with Secondary Finish

2X POLYMER FINISH WITH SECONDARY FINISH -$130 Each (base price)

2X Red Polymer & Secondary BOS Golf finish (This finish has yet to be approved by the USGA & RNA and cannot be applied to the face of a club unless it has a face insert).

Start your order form

STRIPPING OF CHROME, NICKEL OR PLATINUM FINISHES – MINIMUM $30 CHARGE

The above refinishing costs do not include stripping of Chrome, Nickel or Platinum Finishes. This is an additional fee.

SILICONE CLOTHS – $12.95

BOS Golf company name included on cloth.

STAMPS, SIGHT LINES AND LOFT / LIE ADJUSTMENTS

$15 for initials per head, $25 for full name, $35 multiple stamping areas (stamp sizes: 3/32, 1/8, 3/16 & 1/4)

SIGHT LINES

Sight Line – $25 Each
Sight Dot – $15 Each
Cherry Dot – $35
Sight Line Perpendicular – $45

ADDITIONAL SERVICES

Loft & Lie Adjustments – $25 Per Piece
Re-Milling – $55 per Piece
Snow Effect – $35 per Piece
Blizzard Effect: $45 per Piece

EXPEDITE SERVICE AVAILABLE

$30 (minimum fee). This fee is on a per head basis, if milling work is requested additional fees will apply. If you have multiple heads being finished, please contact BOS Golf for your exact product pricing. Most orders take 10-14 business days for the expedite service. Normal lead times without an expedite range from 5-7 weeks or based on the size of the order. Expedite service is not available for items requiring sight line/sight dot installation or face milling.

INSTRUCTIONS FOR SHIPMENT

Fill out and enclose your order form. Make sure you list all your items, list the type of process you would like for each item and write clear instructions for the paint fill. You may attach a separate sheet for paint fill instructions or diagram if needed. Orders received without paper work will be placed on hold until an order form is obtained.

If you send your heads in shafted, we charge $15 per head to pull and re-install the same shaft. If you have a new grip and would like us to install it we charge an additional $15 to re-grip. You need to supply grip. If you need us to cut the length of your shaft there is an additional fee of $10 for this service.

We do not provide New Shafts or New Grips.

Shipping & Handling is additional. We ship worldwide.

TOP